High magnetic plugging the exclusive use of the product must be used in the metal pipe container, follow these steps:
1, according to pipeline pressure vessel select GB1525 magnetic plug chip use;
2 cases within 1MPa plugging, take three tablets stick together GB1525 magnetic block, the steel rod http://www.dulou.cn/shop_view.asp?id=288 hand kneading clay made into a bread stick in GB1525 after magnetic plug chip;
3, the magnetic rods with steel mud-chip pressure by blocking the leak site, puts pressure on the press until no leakage so far, if the leak needs a thicker film heightened increase in magnetic films magnetic block until no leakage;
Four, with a hacksaw to around napping;
5, remove the iron putty adhesive after mixing with Pihui knife to Scratch the top and around the magnetic blocking film;
6, wear disposable gloves to grasp GB120 repeatedly smearing glue on and around;
7, with the glass fill gaps with the outermost layer of aluminum bonded to complete.